Copper Tube crimping lugs series HR-N

HR series lugs are manufactured from electrolytic copper tube with a purity greater than 99.9%, and designed to obtain high electrical conductivity combined with the mechanical strength required to resist vibration and pull out.

CEMBRE lugs are annealed and tin plated for improved surface protection. The annealing process optimises the structural features of the material allowing easier crimping and greater resistance to mechanical stresses.

The barrel entrance of the lug is chamfered to allow easy conductor insertion, while its length facilitates precise positioning in the crimping die.

Each lug is marked with:

• CEMBRE logo and part code
• conductor type and csa (mm²)
• stud Ø (mm)
• crimping die code

Copper Tube crimping lugs according to DIN 46235 Series DR-N

DR series lugs are manufactured from electrolytic copper tube with a purity greater than 99.9%, and designed to obtain high electrical conductivity combined with the mechanical strength required to resist vibration and pull out.

CEMBRE lugs are annealed and tin plated for improved surface protection. The annealing process optimises the structural features of the material allowing easier crimping and greater resistance to mechanical stresses.

Dimensions are according to DIN 46235. The barrel entrance of the lug is chamfered to allow easy conductor insertion, while its length facilitates precise positioning in the crimping die.

Each lug is marked with:

• CEMBRE logo and part code
• conductor type and csa (mm²)
• stud Ø (mm)
• crimping die code

CEMBRE's MAXIblock and MAXIbrass cable gland range is expanding with a series of new products, becoming increasingly flexible and practical.

Thanks to careful product design, the 1940.M and 2940.M series are characterized by the extended cable entry compared to the standard range.

With the same threading as the standard range, the 1940.M and 2940.M fit large-diameter cables, saving space and time in installations.

Thanks to the extended cable entry it is now possible to install large-diameter cables.

Additionally, a longer thread also makes installation on thick plates easier.

• Ideal for EV chargers and wind turbines
• Single hole on electrical panel for multiple uses
• Stop using adaptors

The newly developed MARKINGENIUS®MG4 from CEMBRE has been on the market in Germany. An industrial marking system with thermal transfer technology that takes proven features to a new level with new innovative solutions for connectivity, mobility, and compatibility. Start a project in the office and finish it on the job site - the new GeniusPro Mobile app now gives you smart operation on tablet and smartphone, in line with the motto: PRINTING WITHOUT LIMITS. Cembre is the first manufacturer to integrate the flexible 18V rechargeable battery technology into an industrial printer and thus enables unimagined application possibilities.

CEMBRE – Printing without limits with MG4 - Find out more about the MARKINGENIUS®MG4 thermal transfer printer from Cembre at the following link: https://www.youtube.com/watch?v=C53-RdM1Hs4

Copper Tube crimping lugs series HR-N

HR series lugs are manufactured from electrolytic copper tube with a purity greater than 99.9%, and designed to obtain high electrical conductivity combined with the mechanical strength required to resist vibration and pull out.

CEMBRE lugs are annealed and tin plated for improved surface protection. The annealing process optimises the structural features of the material allowing easier crimping and greater resistance to mechanical stresses.

The barrel entrance of the lug is chamfered to allow easy conductor insertion, while its length facilitates precise positioning in the crimping die.

Each lug is marked with:

• CEMBRE logo and part code
• conductor type and csa (mm²)
• stud Ø (mm)
• crimping die code

Copper Tube crimping lugs according to DIN 46235 Series DR-N

DR series lugs are manufactured from electrolytic copper tube with a purity greater than 99.9%, and designed to obtain high electrical conductivity combined with the mechanical strength required to resist vibration and pull out.

CEMBRE lugs are annealed and tin plated for improved surface protection. The annealing process optimises the structural features of the material allowing easier crimping and greater resistance to mechanical stresses.

Dimensions are according to DIN 46235. The barrel entrance of the lug is chamfered to allow easy conductor insertion, while its length facilitates precise positioning in the crimping die.

Each lug is marked with:

• CEMBRE logo and part code
• conductor type and csa (mm²)
• stud Ø (mm)
• crimping die code

CEMBRE's MAXIblock and MAXIbrass cable gland range is expanding with a series of new products, becoming increasingly flexible and practical.

Thanks to careful product design, the 1940.M and 2940.M series are characterized by the extended cable entry compared to the standard range.

With the same threading as the standard range, the 1940.M and 2940.M fit large-diameter cables, saving space and time in installations.

Thanks to the extended cable entry it is now possible to install large-diameter cables.

Additionally, a longer thread also makes installation on thick plates easier.

• Ideal for EV chargers and wind turbines
• Single hole on electrical panel for multiple uses
• Stop using adaptors