The pico+ distance sensors are a compact series in an M18 housing. There are two housing variants to choose from: with and without angle head. The ultrasonic sensors with push-pull switching output are equipped with IO-Link 1.1.

Detection ranges:

• 0.15 m
• 0.25 m
• 0.35 m
• 1.0 m

Outputs:

• 1 push-pull switching output in pnp and npn switching technology
• 1 analogue output 4-20 mA or 0-10 V

More Information here: https://www.microsonic.de/en/pico+

The hps+ ultrasonic level sensors with their highly resistant PVDF housing and PTFE diaphragm are suitable for use against chemically aggressive media. The sensors can be operated in normal pressure or overpressure up to 6 bar. The level sensors can be extensively parameterised via LinkControl.

Detection ranges:

• 0.25 m
• 0.35 m
• 1.3 m
• 3.4 m

Output stages:

• 2 switching outputs in pup circuit technology
• 1 analogue output and 1 additional pnp switching output.

More Information here: https://www.microsonic.de/en/hps+

The bks+ ultrasonic web edge sensor is a fork sensor for scanning the edges of sound-impermeable materials such as foil or paper. This is why the bks+ is ideally suited for the web control of high-transparency foils, light-sensitive materials, materials with greatly varying transparency and paper subject to high paper dust loads. The bks+ edge sensor facilitates the contact-free web edge scanning of foils, paper and other soundimpermeable materials.

2 housing designs:

• 30 mm fork width
• 60 mm fork width

Output stages:

• 1 Push-Pull switching output with pnp or npn switching technology
• 1 analogue output 4-20 mA and 0-10 V

More Information here: https://www.microsonic.de/en/bks+

microsonic is expanding its portfolio with the esf+1, a new ultrasonic label sensor for modern industrial labeling technology. It combines a slim, flat housing, maximum positioning accuracy, and intuitive operation in an advanced sensor concept.

The lightweight and highly durable fork housing is made of a high-tech plastic with metal-like properties. The flat sensor surface makes cleaning easier and allows a clear view of the transmitter and receiver. The flat lower fork arm allows for particularly close positioning to the dispensing edge. An asymmetrical mounting adapter provides flexibility for installation on the left or right of the dispensing edge. For space-saving cable routing, the sensor has a swivel M12 connector, ideal for limited installation space.

The label material used can be quickly and reliably taught in (Teach-in) at a single touch of a button. The integrated IO-Link interface allows the sensor to be fully parameterized and integrated into existing systems—including the transfer of material parameters to a recipe management system.

The esf+1 is available in two designs:

• pro version (500 kHz) – for standard labels
• expert version (200 kHz) – for labels that are difficult to detect

Both versions are identical in design and interchangeable. The expert version detects labels that were previously undetectable with ultrasonic sensors.

The esf+1 is ideal for labeling applications that require maximum speed, maximum positioning accuracy, and maximum flexibility when handling a wide variety of label materials.

The cube ultrasonic sensors are designed in a cubic housing for demanding applications. The cube is available with the QuickLock mounting bracket. This allows the sensor to be mounted quickly and easily. There are two output stages available: one Push-Pull switching output in pnp- or npn-circuitry and
one Push-Pull switching output and one analogue output or switchable to two switching outputs. Four LEDs show all operating states in any mounting position. The sensor status is clearly visable. cube ultrasonic sensors support IO-Link in version 1.1 as well as Smart Sensor Profile.

Detection ranges:

• 0,35 m
• 1,3 m
• 3,4 m

Outputs:

• 1 Push-Pull switching output in pnp- or npn-circuitry
• 1 Push-Pull switching output and 1 analogue output or switchable to 2. switching output

The pico+ distance sensors are a compact series in an M18 housing. There are two housing variants to choose from: with and without angle head. The ultrasonic sensors with push-pull switching output are equipped with IO-Link 1.1.

Detection ranges:

• 0.15 m
• 0.25 m
• 0.35 m
• 1.0 m

Outputs:

• 1 push-pull switching output in pnp and npn switching technology
• 1 analogue output 4-20 mA or 0-10 V

More Information here: https://www.microsonic.de/en/pico+

The hps+ ultrasonic level sensors with their highly resistant PVDF housing and PTFE diaphragm are suitable for use against chemically aggressive media. The sensors can be operated in normal pressure or overpressure up to 6 bar. The level sensors can be extensively parameterised via LinkControl.

Detection ranges:

• 0.25 m
• 0.35 m
• 1.3 m
• 3.4 m

Output stages:

• 2 switching outputs in pup circuit technology
• 1 analogue output and 1 additional pnp switching output.

More Information here: https://www.microsonic.de/en/hps+

The bks+ ultrasonic web edge sensor is a fork sensor for scanning the edges of sound-impermeable materials such as foil or paper. This is why the bks+ is ideally suited for the web control of high-transparency foils, light-sensitive materials, materials with greatly varying transparency and paper subject to high paper dust loads. The bks+ edge sensor facilitates the contact-free web edge scanning of foils, paper and other soundimpermeable materials.

2 housing designs:

• 30 mm fork width
• 60 mm fork width

Output stages:

• 1 Push-Pull switching output with pnp or npn switching technology
• 1 analogue output 4-20 mA and 0-10 V

More Information here: https://www.microsonic.de/en/bks+