Ultracompact netX 90 design - tested completely

• Ultracompact slave interface in halfsize netRAPID format

• One hardware for all Industrial Ethernet and fieldbus protocols

• Host connection via fast SPI

• Programming platform for efficient communication

• Energy-efficient design for the extended temperature range

• "Secure by design" by integrated crypto core

Ultracompact slave interface for secure field and cloud connectivity

netRAPID 90 is the rapid and secure alternative to a slave interface developed by the customer. The netX90 Chip Carrier is soldered to the host system in the SMD production process like a standard QFP part.

In addition to the proven and flexible multiprotocol processor for all common communication and IIoT protocols, netRAPID 90 also has a Cortex M4 application processor and is available in different memory sizes . Thus, netRAPD 90 is the ideal communication platform for customer-specific solutions with an integrated application – in one single design.

netRAPID 90 is available as a ready-to-use communication module with a fixed scope of functions and a preloaded protocol firmware and as a flexible programming platform to combine communication with application and customer-specific pin assignment.

Due to the automated Hilscher production process, netRAPID 90 can also be delivered preloaded as a service – ready-to-use with customer and application-specific content.

Owing to an integrated Crypto-Core, netRAPID 90 is well-prepared for future security functions, e.g. TLS for CIP security or secure boot as a protection against malware attacks. Thus, netRAPID 90 already is the ideal basis for secure field and cloud connectivity.

cifX PC cards are the easiest and fastest way to integrate PC-based devices into an automated environment. Classic application examples can be found in industrial PCs for plant or local machine control, HMI (Human Machine Interface) panels for machine monitoring and operation, as well as specific solutions such as optical inspection systems, test benches, simulation systems, and robotic solutions. Our market-leading PC card portfolio includes all relevant form factors – from the smallest PC cards in the automation market for compact devices to classic formats such as 19-inch systems.

The cifX PC cards can be used both as master and slave and have multi-protocol capability, allowing you to map all leading fieldbus and Real-Time Ethernet protocols. The entire protocol stack is processed on our proprietary netX chips. The uniform platform strategy means that all card formats and protocols use the same drivers, configuration tools and a standardized API, can be deployed flexibly, and are quickly integrated. A wide range of hardware options also offers you tailored solutions for any environment.

Gateways are used for transferring and converting data between 2 industrial automation networks of the same or different type. They offer a simple and cost-effective solution for any type of data conversion, whether used with fieldbus, Ethernet or Real-Time Ethernet systems or a combination thereof. This enables the efficient integration of devices and plant components into existing structures and the connection of systems and network components.

Our wide range of gateways offers a suitable solution for every application, from cost-optimized devices for simple and dedicated implementation to flexible high-end devices for demanding and individual conversion tasks.

Our gateways are available in 2 different versions. The netHOST, netTAP 50, netTAP 100, netTAP 151 and netSWITCH variants are ideal for installation in control cabinets or distributor boxes. They can be mounted on a standard 35 mm DIN rail according to IEC 60715 and are protected to IP20 requirements. Our netLink devices, on the other hand, are connectors designed for direct mounting, making them both very easy to implement and cost-effective.

With the rise of Industrial IoT, the topic Security became a key technology for cyber-physical systems. For that purpose, Hilscher developed the next generation of network controllers based on the success of the netX 51/52.

The netX 90 is the first building block of this new family. It convinces with its high integration density, optimized performance, improved power loss and is perfectly suitable for industrial applications with smaller form factors.

The increasing complexity of System-on-Chips (SoC) and the enormous costs for software development and maintenance, associated with multiprotocol-capable real-time industrial communication, turned into market requests that promote solution-oriented concepts.

The perfectly harmonized interplay of hardware and software reduces the development time with the netX 90 and enables a faster “time to market”.

• Smallest multiprotocol SoC with an additional Cortex M4 application processor

• Integrated security functions for secure field and cloud connectivity

• Supports all Industrial Ethernet, fieldbus, and IIoT standards

• Energy-efficient SoC with the lowest power loss

Ultracompact netX 90 design - tested completely

• Ultracompact slave interface in halfsize netRAPID format

• One hardware for all Industrial Ethernet and fieldbus protocols

• Host connection via fast SPI

• Programming platform for efficient communication

• Energy-efficient design for the extended temperature range

• "Secure by design" by integrated crypto core

Ultracompact slave interface for secure field and cloud connectivity

netRAPID 90 is the rapid and secure alternative to a slave interface developed by the customer. The netX90 Chip Carrier is soldered to the host system in the SMD production process like a standard QFP part.

In addition to the proven and flexible multiprotocol processor for all common communication and IIoT protocols, netRAPID 90 also has a Cortex M4 application processor and is available in different memory sizes . Thus, netRAPD 90 is the ideal communication platform for customer-specific solutions with an integrated application – in one single design.

netRAPID 90 is available as a ready-to-use communication module with a fixed scope of functions and a preloaded protocol firmware and as a flexible programming platform to combine communication with application and customer-specific pin assignment.

Due to the automated Hilscher production process, netRAPID 90 can also be delivered preloaded as a service – ready-to-use with customer and application-specific content.

Owing to an integrated Crypto-Core, netRAPID 90 is well-prepared for future security functions, e.g. TLS for CIP security or secure boot as a protection against malware attacks. Thus, netRAPID 90 already is the ideal basis for secure field and cloud connectivity.

cifX PC cards are the easiest and fastest way to integrate PC-based devices into an automated environment. Classic application examples can be found in industrial PCs for plant or local machine control, HMI (Human Machine Interface) panels for machine monitoring and operation, as well as specific solutions such as optical inspection systems, test benches, simulation systems, and robotic solutions. Our market-leading PC card portfolio includes all relevant form factors – from the smallest PC cards in the automation market for compact devices to classic formats such as 19-inch systems.

The cifX PC cards can be used both as master and slave and have multi-protocol capability, allowing you to map all leading fieldbus and Real-Time Ethernet protocols. The entire protocol stack is processed on our proprietary netX chips. The uniform platform strategy means that all card formats and protocols use the same drivers, configuration tools and a standardized API, can be deployed flexibly, and are quickly integrated. A wide range of hardware options also offers you tailored solutions for any environment.

Gateways are used for transferring and converting data between 2 industrial automation networks of the same or different type. They offer a simple and cost-effective solution for any type of data conversion, whether used with fieldbus, Ethernet or Real-Time Ethernet systems or a combination thereof. This enables the efficient integration of devices and plant components into existing structures and the connection of systems and network components.

Our wide range of gateways offers a suitable solution for every application, from cost-optimized devices for simple and dedicated implementation to flexible high-end devices for demanding and individual conversion tasks.

Our gateways are available in 2 different versions. The netHOST, netTAP 50, netTAP 100, netTAP 151 and netSWITCH variants are ideal for installation in control cabinets or distributor boxes. They can be mounted on a standard 35 mm DIN rail according to IEC 60715 and are protected to IP20 requirements. Our netLink devices, on the other hand, are connectors designed for direct mounting, making them both very easy to implement and cost-effective.