It pays off to be prepared – find out about all exhibiting companies and the entire product range that will be presented at the SPS this year. This will help you to get in touch with the right business partners.
Here you can find the exhibitors at the SPS 2025. This online search gives you an overview of the participating companies and will be updated regularly.
Use the various filter functions to search for specific product groups, halls, contact information and much more. The filters can also be combined with each other in any way, so that you can adapt the search to your individual criteria.
Exhibitor search SPS 2025
Compact absolute encoder for SIL3 applications with Industrial Ethernet or CAN
Description
CD_582+FS Ethernet/IP – CIPsafety made by TR-Electronic
- SIL3 / SIL 2
- CIPsafety over Ethernet/IP, PROFIsafe over PROFIBUS, open Safety over Ethernet Powerlink; CANopen safety
- Redundant layout (KAT4): two fully independent multiturn absolute encoders in the size of a single one
- Incremental output as an option (HTL, TTL, sincos)
- Most current profiles available in Industrial Ethernet
Absolute rotary encoder in standard dimensions of 58mm holds a true absolute multi-turn double rotary encoder system with integrated safety evaluation. Secured position data (“Safe Position” – SLP) are transmitted via secured bus system to the safety controller. Depending on safety requirement of the specific applications, CD_582+FS fulfil maximum safety standard SIL3, PLe. They are available as well in an optimized version to meet SIL2, PLd requirements.
CD_582 uses the standard modular system of “Generation 2” absolute shaft encoders designed by TR-Electronic. For solid shaft, keyway and key provide the form closure required for reliable connection between application and encoder. The same purpose fulfill partial keyways in blind and hollow shaft encoders with up to 15 mm diameter. Almost any installation situation can be implemented with the standard flange variants. With solid and blind shafts, the user has additional choice placing the connectors at the side of the encoder or at the back side (opposite to the shaft). With limited mounting space, this choice can help to safe some cm.
CD_582+FS are capable of preset adjustment (referencing) in full operation even with moving axis.
The CD_582+FS can be applied in accordance with the current basic and execution standards to an axis, a system module, or a machine with safety functions wherever a standard 58 mm shaft encoder has been used. In principle, the CD_582+FS fits wherever the non-functionally safe CE_582 and CM_582 could be installed. With CD_582+FS, safe and secured automation is no more a matter of installation space.
