OPC UA SDK + OPC Classic

Whether clients for OPC UA or OPC Classic, servers for OPC UA with the OPC UA SDK with OPC Classic from Traeger for your own Industry 4.0 retrofit application. Define OPC UA data nodes, read and write "classic" nodes in the same way and more.

Software Development Kit (SDK) for the development of OPC UA client and server applications. For communication with OPC Classic servers as well as via OPC UA v1.03 and higher with support of OPC Classic with the profiles Data Access (DA), Historical Data Access (HDA) and Alarm & Events (AE).

The OPC UA .NET SDK enables the development of OPC UA client and server applications according to OPC UA v1.03 and higher. The support of OPC Classic enables communication with OPC Classic Servers via OPC DA, OPC HDA and OPC AE. To implement a server, it is sufficient to define the data nodes (see below). The IP address and the transport protocol are defined with the default values "localhost:4840" and "opc.tcp". To establish a client connection, the server address together with the transport protocol scheme is sufficient (see below). To connect to an OPC Classic server, the ProgId and ClassId are also required. No membership in the OPC Foundation and no licence other than that for Traeger's SDK is required for development!

Codabix Industrial Edge

Smart OPC UA gateway, router and more for every thing in the top floor and shop floor – from the hand scanner to the controller, into the database and back again. Edge computing with integrated OPC UA client & server, web server including Web 4.0 APIs, scripting environment and more.

Data processing at the edge under the best conditions and in only three steps: first, connect, second, define data points and third, provide Industry 4.0-compliant data from the edge device. Platform-independent, heterogeneous data sources/targets are networked, their data aggregated, post-processed, pre-processed and generated, and can finally be accessed via OPC UA, REST, SignalR and own paths.

Codabix Industrial IoT

OPC UA bridge, gateway and more for every thing – sensors, actuators, scanners, scales, controllers, plants and many more become part of the Industrial IoT. To the Shopfloor 4.0 with OPC UA, REST and SignalR. Platform-independent digitisation, retrofitting and more.

Sensors, actuators, scanners, scales, controllers, plants and many more become part of the Industrial IoT in three steps: first, connect, second, define data points and third, consume them via OPC UA, REST or SignalR. Platform-independent, every thing on the shop floor can be networked in an Industry 4.0-compliant manner.

SIMATIC S7 SDK

Whether data blocks or inputs/outputs with the SIMATIC S7 SDK from Traeger for all .NET languages and any target platform to the data of any S7 controller. Access, read, write and more variables, structures and other data areas with just a few lines of code.

Software Development Kit (SDK) for developing client applications with C#, VB.NET and C++/CLI for communication with SIMATIC S7 controllers (S7-1500, S7-1200, S7-400, S7-300, S7-200, LOGO!, ...) and similar PLCs (VIPA S7, WIN AC RTX, ...). With an S5-LAN++ also SIMATIC S5 and with S7-LAN++ also SINUMERIK 840D Powerline.

The SIMATIC S7 SDK enables the development of client applications for direct data exchange with SIMATIC S7 controllers and similar via TCP/IP. An Ethernet connection is required for communication. The IP address, slot and rack number of the CPU (if different from the standard) are sufficient to establish the connection. For development, no change to the controller, no additional PLC program, no licence from Siemens and no licence other than that for Traeger's SDK is required!

SINUMERIK + SIMATIC S7 SDK

Evaluate and analyse process data live from NC and PLC with the SINUMERIK SDK from Traeger for any target platform of any 840D controller. Process, merge and more the data from NC and PLC live with just a few lines of code.

Software Development Kit (SDK) for the development of client applications for communication with SINUMERIK 840D controllers of the Solutionline (SL) series including integrated SIMATIC S7. With an S7 LAN also SINUMERIK 840D of the Powerline (PL) series also with integrated SIMATIC S7.

The SINUMERIK SDK enables the development of client applications for direct data exchange with SINUMERIK controllers and integrated SIMATIC S7 controllers via TCP/IP. An Ethernet connection is required for communication. The IP address is sufficient to establish the connection. If the integrated PLC is addressed, the slot number of the CPU in the rack can also be specified. No additional NC/PLC program, no licence from Siemens and no licence other than that for Traeger's SDK is required for development!